01 02
04 05 06

FIBROTEX - A self-cleaning, compact, fully automatic fibrous depth filter designed to eliminate or reduce particulates in water. In response to a requirement for smaller, compact and cheaper filtration equipment, Kalsep has produced the new AX5 model of the Fibrotex filter.
The AX5 can be used on many water sources, including boreholes, rivers and canals thus minimizing the consumption of costly mains water.

Benefits   (back to top)

  • Range of element materials provide a variety of performance ratings down
    to 98% removal of 2μm particles
  • Compact Footprint
  • Low Backwash Volume
  • Fully automatic
  • WRAS listed materials for potable water

Applications   (back to top)

Major applications include:-

  • Iron and Manganese removal from boreholes
  • Filtration of potable supplies drawn from non-mains source
    i.e. borehole, river
  • Mains water polishing
  • Pretreatment prior to Reverse Osmosis
  • rotection of disposable membrane cartridge filters
  • Filtration of recycled process waters
  • Industrial effluent polishing

Comparisons with other filters   (back to top)

The Fibrotex AX5 filter compares favourably with iron removal filters, sandfilters and cartridge filters both in media replacement and operating cost.
Other benefits include:

  • Little or no maintenance
  • No issues with media replacement
  • Element replacement in under half an hour
  • Improved performance over media filters

Specifications   (back to top)

FIBROTEX™ AX5
MAXIMUM FILTER FLOWRATE (m³/day) 3
FLOOR AREA (length x width mm) 1280 x 600
HEIGHT (mm) 1400
CLEARANCE HEIGHT FOR ELEMENT REMOVAL (mm) 1600

APPROX.WEIGHT (kg)
DRY 200
OPERATING 225
LIFTING LID WEIGHT 35
VESSEL VOLUME (Litres) 25.6
INLET & OUTLET FLANGE (mm) / PIPE SIZE (ins) 40/1 ½
BACKWASH & DRAIN FLANGE (mm) / PIPE SIZE (ins) 40/1 ½
AIRLINE CONNECTION - BSPF (ins) ½
BACKWASH FLOWRATE (m³ /hr) 2
BACKWASH TIME (mins) 3 ½


E LECTRICAL POWER SUPPLY REQUIRED

110 V
SINGLE PH
50 Hz
3 Amp
POWER CONSUMPTION (watts) < 100
COMPRESSED AIR REQUIRED PRESSURE (bar g/psi) 7 / 105
VOLUME (Nm³ /hr/Scfm) 42 / 25
INLET RAW WATER PRESSURE MINIMUM (bar g/psi) 2 / 30
MAXIMUM (bar g/psi) 6 / 84
MAXIMUM DIFFERENTIAL PRESSURE (bar g/psi) 2.5 (37.5)
VESSEL BASE FUSION BONDED EPOXY (WRAS LISTED) - BLUE
VESSEL LID PVC-U
EXTERNAL PAINT FUSION BONDED EPOXY - BLUE

 

 
AX5
 
 
 
     
Smith & Loveless Inc Email Kalsep